注册 登录  
 加关注
查看详情
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

詩研DIY

桥梁抗震主页:www.beesr.cn

 
 
 

日志

 
 

Sap2000中刚臂的建立  

2010-06-11 10:18:14|  分类: Sap2000 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
 

Assign Frame End Offsets  

Frame End Offsets are assigned to selected Frame Elements.  

1  Select the FRAME Elements to which you want to apply the Frame End Offsets.

2  On the Assign menu, click Frame and then End Offsets ?in the sub-menu. This will display the Frame End Offsets dialog box.

3  In the Frame End Offsets dialog box: 

If you want to use User Specified End Offsets then check Define Lengths and type in the values for the Offsets at End I and End J.   

If you want the program to calculate the End Offsets from the connectivity of the model then check Update lengths from current connectivity. The program will automatically calculate the End Offsets from the Depth (Major) and Width (Minor) specified for the Frame Element properties.    

Specify a Rigid Zone Factor in the edit box. This is a factor used to define the percentage of the Zone specified through End Offsets to be taken as fully rigid. 0 means no rigid zone and 1 means that the entire zone is taken as rigid.   

4  Click OK.

  评论这张
 
阅读(364)| 评论(0)
推荐 转载

历史上的今天

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2018